Page 287 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL SYSTEM - ENGINE ACCESSORY BELT 12A-19

8. Put the accessory belt around all the belt
pulley, tensioner and idler, except for the
generator belt pulley. With the toolkit, turn
the tensioner bolts clockwise, so that the
accessory belt wraps around the generator
belt pulley. Loose the tensioner
NOTICE:
After the installation of the accessory belt, check
whether it is properly installed around each
pulleys. If any malposition between the belt and
the pulley, turn the tensioner nuts with the toolkit 12A
and slightely loosen the accessory belt, before
further adjustment.
fuwx12A024

9. Install the engine water outlet hose and
tighten the clip screw

fuwx12A023

10. Fill up the coolant (Refer to "Chapter 16 Cooling - Coolant, Replacement")
11. Restore the engine hood

Page 287