Page 416 - Foton Workshop Manual - Sauvana

12B-126 ENGINE MECHANICAL - VALVE

(e). Install the valve spring ③ and the valve
spring upper seat ② .
(f). Place the valve lock clamp ① at the
installation position.

(g). Install the valve lock clamp with the tools of
installing valve lock clamps.
NOTICE:
Knock the top of the valve with the copper bar
after finishing installing the valve lock clamp to
check whether the valve lock clamp is installed
into the appropriate position and install it again if
the valve lock clamp is loosed or bounced.

(h). Install the valve tappet.
NOTICE:
lubricate the external surface of the valve tappet
and the internal surface of tappet hole with the
engine oil before installing the valve tappet.

Page 416