Page 424 - Foton Workshop Manual - Sauvana

12B-134 ENGINE MECHANICAL - PISTON AND CONNECTING ROD

2. Assemble the piston connecting rod
assembly
(a). Aiming at the connecting rod small oil
hole, press the connecting rod sleeve into
the connecting rod small hole by using a
special tool.
NOTICE:
• After the installation of the bush is completed,
check to ensure that the bush is flush with the
connecting rod small end face.
• After the installation, the oil film clearance of the
piston should be checked.

(b). Apply a layer of clean oil to the piston pin
evenly.
(c). Aim the little head of the connecting rod at
the piston pin hole, and insert the piston
pin into the piston pin hole.
NOTICE:
When assembling the piston connecting rod, the
forward marks should be in the same direction,
instead of the opposite direction.

(d). Install the piston pin clamping spring.

Page 424