Page 732 - Foton Workshop Manual - Sauvana

15C-4 EXHAUST -EXHAUST PIPE

EXHAUST PIPE

REPLACEMENT
NOTICE:
•When assembling or disassembling the rubber hanger, apply some engine oil on the
interface tofaciliate assembly or disassembly.
•Replace a new seal when installing the exhuast pipe and do not reuse the old seal, or it
may affectthe air-tightness.
• After long-term use, the seal may stick to the interface. Thus, before installing a new seal,
cleanthe interface with a scraper to avoid potential leakage.

1. Turn off the ignition switch
2. Wait for it cooling down
3. Lift up the vehicle

4. Remove the rear exhaust pipe assembly
(a). Unscrew the connecting nuts between the
rear exhaustpipe assembly and the silencer
assembly, and removethe seal.

fuwx15C002

(b). Apply some engine oil on the rubber
hanger and remove the rubber hanger of
the rear exhaust pip eassembly and then
the assembly.

fuwx15C003

Page 732