Page 790 - Foton Workshop Manual - Sauvana

17B-12 LUBRICATION - OIL SUMP
OIL SUMP

REPLACEMENT

1. Remove the oil sump
(a). Drain the engine oil. (Refer to"Chapter 17 Lubrication - Engine Oil, Replacement")

(b). Remove the fastening bolts of oil sump.

fuwx17B016

(c). As shown in the figure, insert the oil sump
remover into the mounting surface between
oil sump and cylinder block.
(d). Knock the oil sump remover along the
diagonal plane to move it horizontally.
(e). Use the oil sump remover to separate the
sealing surface between oil sump and
cylinder block and remove the oil sump.
NOTICE:
• While installing the oil sump remover, pay
attention to check the installation positions of the
studs.
• While installing the oil sump remover, slide along
fuwx17B017
the oil sump carefully without prying its surface,
in order to prevent damaging the mounting
surface of oil sump and causing oil leakage.

Page 790