Page 854 - Foton Workshop Manual - Sauvana

21A-12 TRANSMISSION - TRANSMISSION ASSEMBLY

15. Connect the reverse lamp switch connector

16. Top up the gearbox oil and tighten the filler
plug
Torque:65~78N•m
Transmission oil (model):GL-4 75W/90
NOTICE:
• Don't mix the gearbox oil of different brands.
• When checking the oil level, ensure the vehicle
is level and the oil level is no lower than 5mm
from the bottom of the filler plug.

17. Connect the negative cable of the battery (Refer to "Chapter 18 Starting & Charging
- Battery, Replacement")
18. Transmission grinding standards and tests
(a). It shall be performed at approx. 1500 RPM, with the oil temperature no lower than
15℃ and without load. It shall run no less than 15 minutes at the neutral gear and
20 minutes at any other gear.
(b). Check whether the shifting is smooth and the gears are completely engaged.
(c). When testing the transmission, there shall be no abnormal sound of friction or impact.
(d). The transmission shall have no leakage.
(e). After grinding, drain the gear oil used for grinding, thoroughly clean the interior of
the transmission and fill it with the gearbox oil as required.

Page 854