Page 967 - Foton Workshop Manual - Sauvana

FRONT SUSPENSION - FRONT WHEEL ALIGNMENT 31-7

3. Adjust the Front Wheel Alignment
NOTICE:
•The front wheel alignment parameters shall be adjusted with no load.
•The difference bwteeen the front wheel alignment parameters of left and right wheels shall
be no more than 30'.
•Adjusting sequence of front wheel alignment: kingpin caster - wheel camber - kingpin
inclination- front wheel hub.

(a). Install Wheel Alignment Analyzer.
NOTICE:
Measure the front wheel alignment parameters
according to the user's manual and requirements
of the wheel alignment analyzer.

4. Adjust the Kingpin Caster
(a). Without load, adjust the adjusting cam
module of the lower swing arm front shaft
or the lower arm rear shaft. Adjust the
caster.
(b). Increase the kingpin caster by rotating the
front camshaft towards the outside of the
frame or the rear camshaft towards the 31
inside of the frame, vice versa.
NOTICE:
Each scale of the cam changes the caster for
7'.Turn the adjusting cam for no more than 4.5
scales from the central line.
(c). After adjustment, tighten the retaining nuts.
Torque: 150~190N·m

Page 967