Page 1104 - Workshop Manual - Tunland (2017)

04-418 DIAGNOSTICS - ENGINE CONTROL SYSTEM

04 EXCESSIVE VIBRATION

Fault phenomenon Diagnosis logic Possible reasons
• Exterior, interior or support • Exterior, interior or support
of an engine of an engine fault
Excessive vibration • Engine suspension • Engine suspension fault
• Body • Body fault
• Chassis • Chassis fault

Diagnosis Procedure

1 . Check the engine data
(a) Ignition switch: OFF.
(b) Connect the diagnosis tool with the fault diagnosis connector (16 pins) on the lower
left of the dashboard.
(c) Ignition switch: ON, and start the diagnostic tool.
(d) Read the motor data shown on the diagnostic tool.
Check whether the data flow is normal or not.

YES>To step 2.
No >Maintenance related faults.

2 . Check the engine suspension

(a) Check whether there is resonance between the engine and the chassis or the body.
(b) Check if the cushion in the engine suspension is aging or cracked.
Is the inspection result normal?

YES>To step 3.
No >Maintenance related faults.

3 . Check engine external parts

(a) Check whether the external components of the engine are properly assembled.
Is the inspection result normal?
YES>To step 4.

No >Maintenance related faults.

4 . Check engine internal parts
(a) Check whether the internal parts of the engine are worn or damaged.

Is the inspection result normal?

YES>Complete the diagnosis and the system is confirmed to be normal.
No >Maintenance related faults.