Page 147 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - ANTI-LOCK BRAKING SYSTEM (ABS) 04-9

PRE-INSPECTION

1 . Self-diagnosis system

(a) Open the ignition switch to ON position, check
the ABS indicating lamp on the combination
instrument.
04
Standard: ABS indicating lamp will go out
automatically 3-4 seconds after the ignition
switch is turn on.
If ABS indicating lamp is , it shows that there
are circuit troubles in the system,
maintenance shall be carried out after reading
the diagnostic trouble code (DTC) by using
the diagnostic apparatus.

CAUTION
After the ignition switch is turned to ON position,
the ABS control module will inspect the electric
apparatus and components in the system.

2 . Reading and clearance of the trouble code
(DTC)
(a) Use diagnostic apparatus to read diagnostic
trouble code (DTC)

• Connect the diagnostic apparatus and
DLC- data chain socket connector
(diagnostic box).
• Click to enter " Beiqi Futian - pika -
ABS - read the trouble code ", the
diagnostic apparatus will display
diagnostic trouble code in the ABS
control module.

(b) Clearing diagnostic trouble code
• Click to enter " Clear trouble code "
Clear the diagnostic trouble code in the
ABS control module through operating
diagnostic apparatus.