Page 1668 - Workshop Manual - Tunland (2017)
P. 1668
34-46 AXLE AND PROPELLER SHAFT - MAIN REDUCER GEAR OIL
MAIN REDUCER GEAR OIL
REPLACEMENT
1 . Switch off the ignition.
2 . Lift up the vehicle.
3 . Replace Rear Main Reducer Gear Oil
(a) Unscrew the rear main reducer filler bolt.
(b) Unscrew the rear main reducer drain plug and
drain the gear oil.
CAUTION
The drained gear oil shall be properly collected
and treated as regulated.
34
(c) Once completely drained, tighten the drain
bolt.
Torque: 38 ~ 45N·m
CAUTION
Before installing the drain bolt, clean the dirt on
the drain bolt and apply some thread sealant.
