Page 1770 - Workshop Manual - Tunland (2017)

35-18 BRAKE - MASTER BRAKE CYLINDER VACUUM BOOSTER

REPLACEMENT

1 . Remove the fuel-water separator and the fuse box.
2 . Drain the brake fluid.
CAUTION

Don't spill the brake fluid on the paint or your skin. If that's the case, clean it
immediately.

3 . Remove the Master Brake Cylinder &
Vacuum Booster
(a) Release the hose clip and disconnect the
hose connected to the oil cup.

(b) Release the harness clamp and remove the
brake fluid level sensor connector.
(c) Pull out the vacuum alarm sensor connector.

35

(d) Disconnect the vacuum tube.