Page 1788 - Workshop Manual - Tunland (2017)

35-36 BRAKE - ABS EXECUTOR ASSEMBLY

(e) Tighten the ABS executor retaining nut.
Torque: 20±2N•m

(f) Connect the brake fluid pipe connected to the
ABS executor.
Torque:M10×1:19～21N•m

Torque:M12×1:22～24N•m

(g) Connect the ABS executor connector.

35

5 . Install battery negative cable. (Refer to "Chapter 20. Start & charge - battery,
replacement")
6 . Top up the brake fluid. (Refer to "Chapter 35. Brake - brake system discharge,
discharge air")
7 . Discharge the air in ABS. (Refer to "Chapter 35. Brake - brake system discharge,
discharge air")
8 . Check the level of the oil cup, which shall be at the MAX mark.