Page 1850 - Workshop Manual - Tunland (2017)
P. 1850
41-36 TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY
(e) Tighten the Shift Fork Dowel Bolt
Torque: 8 ~ 49N·m
(f) Install the front bearing snap ring.
10 . Install the front bearing cap.
(a) Install the front shaft oil seal.
41
(b) Tighten the retaining bolts.
Torque: 7.8 ~ 11.8N·m
CAUTION
• Before installation, clean the impurities
and dirt on the housing interface.
• During installation, apply Loctite 518
sealant evenly on the front bearing cap
interface.
