Page 1897 - Workshop Manual - Tunland (2017)
P. 1897

TRANSMISSION（JC538） - TRANSFER CASE (4WD)                          41-83

                                                           (f)    Install the housing.
                                                           (g)    Tighten the fixing bolts.

                                                                  Torque:27～40N•m




























                                                           12 .   Install the rear flange.
                                                           (a)    Install the gasket and flange.
                                                           (b)    Tighten the fixing nuts.

                                                                  Torque: 305～332N•m

                                                                CAUTION

                                                           The front driving shaft flange can be installed in
                                                           the same way as the rear driving shaft flange.






                                                                                                                     41



                                                           13 .   Install the gear shift motor assembly.
                                                           (a)    Install the gear shift motor assembly.
                                                           (b)    Tighten the fixing bolts.
                                                                  Torque:8～11N•m
   1892   1893   1894   1895   1896   1897   1898   1899   1900   1901   1902