Page 220 - Workshop Manual - Tunland (2017)

04-82 DIAGNOSTICS - SRS SYSTEM

Diagnostic steps

1 . Check the preloading assembly (preloading assembly –ground, passengers’

seat belt), passengers’ seat belt.
(a) Confirm the ignition switch is closed, and disconnect the negative pole of the battery
for more than 90 seconds.
04
(b) Disconnect preloading assembly connector
D009, passengers’ seat belt.

(c) Disconnect SRS control module connector
C016.

(d) Measure the electrical resistance based on
the value in the following form.

Standard resistance (check whether there
is short circuit)

Multimeter connection Standard value
D009 (1) ground
≥ 1 MΩ
D009 (2) ground

Check whether the result is normal?
Yes> go to step 2