Page 304 - Workshop Manual - Tunland (2017)
P. 304

04-166                          DIAGNOSTICS - POWER WINDOW

                                                      (c)    Disconnect connector C035, BCM control unit.









      04








                                                      (d)    Measure the electrical resistance between
                                                             power window switch J004（8）in driver’s
                                                             door and BCM control unit connectorC035
                                                             （D12）.
                                                             Standard electrical resistance (check
                                                             whether there existent an open circuit)

                                                       Multimeter connection
                                                                                     Specified value
                                                                stitch

                                                       J004(8)-C035（D12）                  ＜ 2 Ω
















           Check whether the result is normal?
           Yes> go to step 4
           No > Maintenance or replace harness.


           4 .    Check harness and connector (power window switch, driver’s door-ground)
           (a)    Ignition Switch: OFF.
   299   300   301   302   303   304   305   306   307   308   309