Page 312 - Workshop Manual - Tunland (2017)
P. 312
04-174 DIAGNOSTICS - POWER WINDOW
(c) Disconnect connector C035, BCM control unit.
04
(d) Measure the electrical resistance between
power window switch J004（8） of driver’s
door and connectorC035（D12） of BCM
control unit. .
Standard electrical resistance (check
whether there existent an open circuit)
Multimeter connection
Specified value
stitch
J004（8）- C035 ＜ 2 Ω
（D12）
Check whether the result is normal?
Yes> go to step 4
No > Maintenance or replace harness.
4 . Check harness and connector (power window switch, driver’s door-ground)
(a) Ignition Switch: OFF.
(b) Pull out Power window switch connector J004,
driver’s door
