Page 341 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - REAR WINDSCREEN DEFROST SYSTEM 04-203

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

Multimeter connection Standard value
04
R1（30）-D004（1） ＜ 2 Ω

Check whether the result is normal?
Yes> Go to step 8.
No > Maintenance or replace harness.

8 . Check harness and connector (rear windscreen defroster-ground)
(a) Ignition Switch: OFF.
(b) Pull out rear windscreen defrost relay R01.
(c) Disconnect connector D004 of rear windscreen defroster.

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

Multimeter connection Standard value

D004 (1) ground ＜ 2 Ω

Check whether the result is normal?
Yes> replace rear windscreen defroster.
No > Maintenance or replace harness.