Page 683 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - TYRE PRESSURE MONITORING SYSTEM 04-545

(c) Use a multimeter to measure resistance
value.
Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value
04
Battery (+) -D005（1 ＜ 2 Ω

D005

ftwxd041430

Check whether the result is normal?
Yes> go to step 3
No > Maintenance or replace harness.

3 . Check the harness and connector (tyre pressure monitoring controller
-grounding)
(a) Ignition Switch: OFF.
(b) Disconnect the connectorD005 of the tyre pressure monitoring controller.

(c) Use a multimeter to measure resistance
value.
Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value
D005
D005（16）- grounding ＜ 2 Ω

ftwxd041431

Check whether the result is normal?

Yes> go to step 4
No > Maintenance or replace harness.

4 . Check harness and connector (ignition switch -tyre pressure monitoring
controller)

(a) Ignition Switch: OFF.
(b) Disconnect the connectorD005 of the tyre pressure monitoring controller.