Page 95 - SMM2 eBOOK
P. 95
P.5 Balustrades and staircases (cont'd)
6. Isolated balustrades and newels shall be enumerated and described stating the size.
Framed balustrading shall be given in accordance with clause P.5.1.
P.6 Sundries
1. Duct-covers complete with frames shall be given in metres stating the width, the thickness
and the type. Ends, angles and intersections shall be deemed to be included. Cutting
duct-covers shall be deemed to be included.
2. Gates, collapsible gates and revolving shutters complete with frames, guides, tracks and
fastenings shall each be given separately stating the size, type and approximate weight.
3. Cloakroom fittings, cycle-racks, storage racks and the like shall each be given separately
stating the size and type.
4. Grilles and gratings complete with frames shall each be given separately stating the size,
type and approximate weight.
5. Ladders complete with brackets shall be described stating the size.
6. Surface-boxes and inspection covers complete with frames shall each be given separately
stating the size and the type.
7. Sectional tanks shall be described stating the capacity, size and approximate weight.
8. Structural metalwork shall be given in accordance with Section N.
Plates, bars, etc.
P.7 Floor plates
1. Floor plates shall be given in square metres stating the thickness and average size and
whether plain, chequered or perforated. Irregular-shaped floor plates shall be enumerated
and described.
2. Frames, arch-bans, bearens and stays shall be each given in metres stating the size.
3. Labours to ends, joint, angles and intersections, twists and wreaths shall be deemed to be
included.
4 Skirtings and similar trim shall be given in metres and described stating the size. Fitted
ends, mitred angles and corner pieces shall be enumerated separately.
5. Straps, collars, hangers, brackets and corbels shall be enumerated and described stating
the size.
6. Mat-frames shall be described stating the size and cnoss-section at the members and the
size of the mat space.
92
