Page 22 - CATALOG 2017
P. 22
TOP WITH PEDESTAL LEG
I N S TA L L AT I O N
NOTE: Glass leg height or placement of “L” Bracket in floor will affect finished height.
All measurements are approximate. Make all final installation preparations after
receiving the product for field verification of final measurements.
FRONT VIEW SIDE VIEW
��� ���
���
��� ������� 2 X 6 wall stud
�������� ��� recommended for
installation
�������
������ �������
Installation Procedure
NOTE: Installation recommends a minimum of 2 people to install correctly!
1. Measure from wall (less base board) out 11 1/2” and anchor “L” bracket to the
floor with flat side to the front.
2. Place clear shims on the floor about 1” in from each end of the bottom of the
glass for the leg to rest on.
3. Measure from the floor up 30 5/8” to the top of the pedestal, then level the
top perpendicular to the wall and secure the top to the wall. (2” x 6” wall stud
recommended for installation.)
4. Set leg bottom on top of shims and against “L” bracket and set the stone top
slipping the top of the glass leg into the “U” channel underneath top.
5. Run a bead of silicone between top and leg and between leg and floor. Trim off
excess shim.
ALL MEASUREMENTS ARE APPROXIMATE +/- 1/4”.
