Page 72 - Weldclass_Catalogue_2017_Flip

Gas Equipment

HEATING TIPS
OXY/ACETYLENE

• Precision Machined to help Prevent flashback & back-fire
• Use with oxygen/acetylene
• Connects to P4-SHB Tube/Barrel
OPERATOR INFO:
• Heating with Oxy/Acetylene has limitations and hazards.
Care must be taken to ensure that the maximum draw-off
consumption rate of acetylene is not exceeded (consult
your gas supplier for details). For this reason, Acetylene
tips are available only up to size 2.
• Where possible, Weldclass recommends that Oxy/LPG
be used in preference to Oxy/Acetylene. LPG is safer and
less prone to flashback or backfire, and larger tip sizes
are available for heavy heating. LPG is also often only a
fraction of the cost of Acetylene.

Part No. Description Unit

P4-AHT1 Size 1 (8 x 12) - Connects to P4-SHB Each
Tube/Barrel
P4-AHT2 Size 2 (12 x 12) - Connects to P4-SHB Each
Tube/Barrel

HEATING TIPS
OXY/LPG

• Precision Machined to Prevent flashback & back-fire
• For use with Oxy/LPG
• Connects to P4-SHB Tube/Barrel
OPERATOR INFO:
• Tip size 1 can be used with ‘standard’ heating mixer (P4-
AHMX).
• Tip sizes 2 & above must be used with ‘Hi-Flow’ heating
mixer (P4-LPHMX)

Part No. Description Unit
Size 1 (18 x 12) - Connects to P4-SHB
P4-LPHT1 Each
Tube/Barrel
P4-LPHT2 Size 2 (36 x 12) - Connects to P4-SHB Each
Tube/Barrel
P4-LPHT3 Size 3 (48 x 12) - Connects to P4-SHB Each
Tube/Barrel

www.weldclass.com.au  1300 784 200 072