Page 468 - Catalogues
P. 468

Installation Systems

 Beam clamp MI-SGC  Connector MIC-MI/MQ M8
 Key applications and advantages  Technical data  Key applications and advantages  Technical data
 ■  MI beam clamp for direct connection of   Additional product   Use in pairs  ■  Direct connection of MQ installation   Material   Connector: DD11 MOD
 MI girder to steel beam  information            channels to the MI system       composition     - HN 547, S235JR - DIN
                                                                                                 EN 10025; bolt: 8.8
 ■  For steel beams with flange thicknesses   ■  Forces and moments are transmitted
                                                                                                 grade steel
 from 3 to 36 mm and angles of up to             reliably through positive engagement            HDG: connector 55
 15°                                          ■  Keyed hold for optimum transmission of   Surface finish  µm - DIN EN ISO 1461;
 ■  Corrosion protection on the steel beam       forces and moments                              bolt 45 µm - DIN EN
 is not damaged by the beam clamp                                                                ISO 1461



           Ordering designation  MI girder type  Weight  Tightening torque  Sales pack   Item number
                                                                           quantity
 Ordering designation  Thread - M  Weight  Width - B  Wrench size  Tightening torque  Sales pack   Item number  MIC-MI/MQ-M8   90, 120  0.06 kg  20 Nm  5 pc  304882
 quantity                                                                                          0  [
 MI-SGC M12   M12  0.36 kg  30 mm  19 mm  84 Nm  16 pc  233859



 %         Elevator part MIC
 0
                                              Key applications and advantages    Technical data
                                              ■  Horizontal divider beam in elevator   Surface finish  HDG: 55 µm - DIN EN
 Beam clamp MI-DGC                               shafts                                          ISO 1461
 Key applications and advantages  Technical data  ■  Fastening the guide rails
                                              ■  Easy installation between two walls
 ■  MI beam clamp for direct connection of   Material   Clamp: EN-
 MI girder to steel beam  composition  GJMB-350-10 - DIN EN   ■  Oblong holes simplify exact positioning
 1562, EN-GJMW-400-5
 ■  For steel beams with flange thicknesses
 - DIN EN 1562, EN-
 from 3 to 36 mm and angles of up to
 GJMW-450-6 - DIN
 15°  EN 1562; U-bolt: Steel
 ■  Corrosion protection on the steel beam   grade 8.8; Nut: Steel
 is not damaged by the beam clamp  grade 8
 Surface finish  HDG: Clamp 55 µm
 - DIN EN ISO 1461;
 U-bolt, Nut 45 µm - DIN   Ordering designation  MI girder type  Weight    Sales pack   Item number
 EN ISO 1461                                                               quantity
 Additional product   Beam clamps always to   MIC-U-EL   90  0.97 kg       8 pc           431681
 information  be used in pairs
                                                                                                      [

 Ordering designation  MI girder type  Weight  Tightening torque  Sales pack   Item number

 quantity

 MI-DGC 90   90  1.02 kg  84 Nm  4 pc  233860

           MIC-U-EF                 90, 120              0.22 kg           8 pc           431682

 MI-DGC 120   120  1.04 kg  84 Nm  4 pc  233861


           MIC-90-U-ED              90                   2.98 kg           2 pc           431680
 MI/MQ cross connector MIC-MI/MQ-X                                                                                     [
                                                                                                               [


                                                                                                               [
                                                                                                     [
 Key applications and advantages  Technical data
 ■  Direct connection of MQ installation   Material   Connector: DD11 MOD
 channels to the MI system  composition  - HN 547, S235JR - DIN
 EN 10025; bolt: 8.8
 ■  Keyed hold for optimum transmission of
 grade steel; nut: 8 grade
 forces and moments
 steel
 ■  Forces and moments are transmitted   Surface finish  HDG: connector 55 µm
 reliably through positive engagement  - DIN EN ISO 1461; bolt,                                                      Installation  Installation   Systems Systems
 nut 40 µm - DIN EN ISO
 10684
 Ordering designation  MI girder type  Weight  Tightening torque  Sales pack   Item number
 quantity
 MIC-MI/MQ-X   90, 120  0.36 kg  50 Nm  16 pc  304881


   [






 458  Visit the local website for more information on products and services  www.hilti.group                  459
   463   464   465   466   467   468   469   470   471   472   473