Page 85 - hp server user guide_Neat

— Box 1

14. Remove the drive blanks.
15. Install the hot-plug drives ("Installing a hot-plug drive" on page 39).

IMPORTANT: Populate drive bays based on the drive numbering sequence. Start from the
drive bay with the lowest device number. For device numbering information, see "Drive
numbering (on page 14)."

16. Install the fans (on page 24).
17. Install the system air baffle (on page 22).
18. If removed, install the PCI air baffle ("PCI air baffle option" on page 57).
19. Install the access panel (on page 19).
20. Return the server to an upright position.
21. Connect each power cord to the server.
22. Connect each power cord to the power source.
23. Power up the server (on page 17).
24. Install and lock the tower bezel ("Install the tower bezel" on page 18).

LFF drive enablement option

To install the component:
1. Unlock and remove the tower bezel ("Remove the tower bezel" on page 17).
2. Power down the server (on page 17).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Place the server on its side.
5. Remove the access panel (on page 18).
6. If installed, remove the PCI air baffle (on page 20).
7. Remove the system air baffle (on page 22).
8. Remove the fans (on page 23).

Hardware options installation 85