Page 165 - Tar River Updated

Table No 12

BELCO PART # MOWER TYPE/QUANITY
No. Name
185/165/135/135M
DM30015-185
Metal Guard – Set (Position 1-6) 15-0314 1/0/0/0
Metal Guard – Set (Position 1-6) DM30015-165 15-0091 0/1/0/0
DM30015-135 15-0091/B 0/0/1/1
Metal Guard - Set (Position 1-6)
1 Right Shield DM30015R-85 -65 -35 * 1/1/1/1
2 Rear Shield DM30069-85 -65 -35 * 1/1/1/1
3 Left Shield DM30015L-85 -65 -35 * 1/1/1/1
4 Bent Reinforcement Bar- (185) DM30043 * 2/0/0/0
4 Bent Reinforcement Bar- (135 -165) DMT0804 * 0/2/2/2
5 Reinforcing Angle Bar- (185) DM30071 * 1/0/0/0
5 Reinforcing Angle Bar- (165) DM30237 * 0/1/0/0
5 Reinforcing Angle Bar- (135) DMT0805 * 0/0/1/1
Reinforced Apron (185) DM30145-85 See note * 15-0313 1/0/0/0
6 Reinforced Apron (165) DM30145-65 See note *15-0067/A 0/1/0/0
Reinforced Apron (135) DM30145-35 See note *15-0067/B 0/0/1/1
7 Bolt- M10 x 1.5 x 25 - 8.8 (Galv) BM101525 **11-0075 19/19/19/21
8 Flat Washer- M10 FW10 **11-0055/A 38/38/38/42
9 Self-locking Nut- M10 x 1.5 LNM1015 **11-0127/A 19/19/19/21
10 Bolt- M6 x 1.0 x 16 - 8.8 (Galv) BM061016 **11-0188/A 37/37/33/29
11 Nut- M10 x 1.5 NM1015 **11-0043/A 37/37/33/29
12 Large Flat Washer- M6 LFW10 **11-0082/A 37/37/33/29
13 Large Flat Washer- M6 LFW10 **11-0082/A 37/37/33/29
14 Bolt- M8 x 1.25 x 16- 8.8 (Galv) BM0812516 **11-0187/A 4
15 Lock Washer- M8 LW08 **11-0049 8
16 Nut- M8 x 1.25 NM08125 **11-0040 4
* THESE PARTS INCLUDED IN THE METAL SHIELD SET FOR THE MOWER

** THESE PARTS INCLUDED IN HARDWARE SET FOR THE MOWER

PART # 6 (APRON) IS ONE PIECE ON THE CURRENT MODELS. WE USETHE SUFFIX M=MALE SNAPS &
F=FEMALE SNAPS FOR THE TWO-PIECE APRONS UNTIL OUR STOCK IS EXPENDED.

428