Page 628 - Flipbook_SolidDesignSoutheast2020
P. 628

Auger Fillers
 SPECIFICATION SUMMARY:
 Weighing Systems  density. Semi-automatic operation; requires an operator.   Applications: Accuracy dependent on product density. High production
 Separate floor/tabletop platform scale or combination bag clamp/load   Set point: Specifies filling and weighing in a single stage fill where   rates. Capable of fully automatic operation without operator intervention.
             Allows production to continue with load cell/encoder failures or
 cell scale assemblies for accurate weight control of containers and filled   product is dispensed as its weight approaches a user-defined target   malfunctions.
 product.  weight. Product is weighed at the end of fill and categorized as
 Fill-to-Weight  acceptable, underweight, and overweight.  Fill by Revolutions: Specifies filling only. No weighing occurs. Product   Net Weigh Fillers
             is dispensed for a user-specified number of auger revolutions. Bypasses
 Available Fill-to-Weight models include:  Applications: Moderate accuracy/moderate production rates (higher   load cell in cases of failure/malfunction.
 than Bulk & Dribble).
 Bulk & Dribble: Specifies filling and weighing in a two-stage fill cycle   Used with products that change density.
 where the greater portion of product is dispensed and weighed, then
 filled again to a desired target weight. After the second dribble-fill,   Semi-automatic operation; requires an operator.
 the container is weighed again and is categorized as acceptable,   Fill by Time: Specifies filling only; no weighing occurs. Product is   Cup Fillers
 underweight, or overweight.  dispensed for a user-specified fill time. Bypasses load cell and encoder
 Applications: High accuracy, low production rates, consistent product   in case of failure/malfunction.
                                    Piston Fillers
 FILL-TO-WEIGHT MACHINES
                                    Checkweighers
                                    Vertical Form Fill & Seal

                                    Labelers

                                    Unscramblers


                                    Machine Accessories
 Model BS with Roller Scale, Electric Ball    Model BS Pouch Filling System
 Screw Lift, Dust Shroud and PLC Controls  Model BS with Load Cell,
 418   C REAMER Y   W A Y ,   EXT ON   P A   •   610 . 524 . 7350   •   INFO @ ALL - FILL . C OM   •   WWW . ALL - FILL . C OM  13
   623   624   625   626   627   628   629   630   631   632   633