Page 161 - Buick-Cadillac Catalog

Buick Engine - Fuel Hose

Buick Engine
INL13719 CLP201 CLP202 CLP203
INL13718

Pinch Clamp for 5/16 Hose
Fuel Line Pinch Clip
Pn# - INL13718 - 2pc $2.50 Ea Pn# - CLP201 - 1pc $.75 Ea
Pn# - INL13719 - 1pc $1.25 Ea
Pump To Carb Line 1955-1988 Pinch Clamp for 5/16" Fuel Rubber Hose. These can Fuel Line Pinch Clamp - 1/4” I.D. Hose Spring Clip - Red. Used
on all cars to connect the rubber hose to the return hard line.
be crimped on with side cutter pliers.
Pn# - INL13711 - 1pc $16.00 Set Pn# - CLP202 - 1pc $.75 Ea
1955-1988 General Pump To Carb Line, One end 90 degree tube INL13717 Fuel Line Pinch Clamp - 5/16” I.D. Hose Spring Clip - Black. On
the other end straight with 2' center section. This is a general all cars to connect the rubber hose to the fuel or vapor hard line.
pump to carb line to fit non stock applications where the car has an
aftermarket carb or pump 3/8 tube with 5/8-18 thread. Pn# - CLP203 - 1pc $.75 Ea
Fuel Line Pinch Clamp - 3/8” I.D. Hose Spring Clip - Green. On
INL13716
all cars to connect the rubber hose to the fuel hard line.
Pinch Clamp for 3/8 Hose
Pn# - INL13716 - 2pc $2.50 Set
Pn# - INL13717 - 1pc $1.25 Each
1955-1988 Pinch Clamp for 3/8" Fuel, Transmission or Power
Steering Return Low Pressure Hose. These can be crimped on
with side cutter pliers.
INL10140 INL10474
INL13131 INL13132 INL13133
Pump To Carb Line 90 GM Fuel Hose Stamp
Pn# - INL13712 - 1pc $16.00 Set Pn# - INL10140 -1pc $13.50 Ea.
1955-1988 General Pump To Carb Line, Two ends 90 degree tube 1964-77 GM Fuel Hose Stamp - stamp was used on all rubber
with 2' center section. This is a general pump to carb line to fit fuel hose at the fuel pump and the sending unit at the gas tank.
non stock applications where the car has an aftermarket carb or Hose Marking White Ink Pad
pump 3/8 tube with 5/8-18 thread.
3/8" Fuel Hose Set Pn# - INL10474 -1pc $12.00 Ea
Pn# - INL13131- 5pc $5.50 Set 64-79 GM hose marking white ink stamp pad.
1955-81 3/8" Fuel Hose Set , 2 ft of fuel hose with 4 correct olive
green clips, with factory correct gas printing. Enough to connect
the fuel line at the fuel pump and the sending unit.
5/16" Fuel Hose Set
Pn# - INL13132- 5pc $5.50 Set
1955-81 5/16" Fuel Hose Set , 2 ft of fuel hose with 4 correct black All GM Fuel Supply Hose
green clips, with factory correct gas printing. Enough to connect
the fuel line or vapor line at the engine and the sending unit. Pn# - INL13319 -3pc $3.95 Ea
1/4" Fuel Hose Set 1960-87 All GM Fuel Line Hose with Correct Gas Printing and
Green Pinch Clips. 13 inches of 3/8" hose with olive green clips.
67-69 Fuel Hose Clamps Pn# - INL13133- 5pc $5.50 Set
Pn# - INL12433 - 2pc $25.00 Set 1955-81 1/4" Fuel Hose Set , 2 ft of fuel hose with 4 correct red
clips, with factory correct gas printing. Enough to connect the fuel
1967-69 Pontiac, GTO, Firebird Main Fuel Line to Fuel Pump ,return line or vapor line at the engine and the sending unit.
Rubber Hose Small Tower Clamps. Originally used to hold the
1/4" return rubber hose in place on all models. They can be used
on all 3/8, 5/16 & 1/4 Hose.
All GM Fuel Line Hose
Pn# - INL13320 -6pc $6.95 Ea
1960-87 All GM, Fuel Line Hose with Correct Gas Printing and
Green Pinch Clips. 13 inches of 3/8" hose at the pump and 6" at
the sending unit, with olive green clips.
3/8" Fuel Hose by the ft
Pn# - INL13134- per ft $1.80 Ft
1955-81 3/8" Gas Stamped Fuel Hose, with correct gas printing.
70-72 Fuel Hose Strap 5/16" Fuel Hose by the ft
Pn# - INL10758 - 1pc $3.00 ea Pn# - INL13135- per ft $1.80 Ft
1970-72 Pontiac, GTO, Judge, Firebird Main Fuel Line and Fuel 1955-81 5/16" Gas Stamped Fuel Hose, with correct gas printing. All GM Fuel / Return Hose
Return Line Hose Strap. The was used to hold the 2 hoses
together. Also used 64-79 GM Wire / Cable Strap. 1/4" Fuel Hose by the ft Pn# - INL13321 -11pc $7.95 Ea
Pn# - INL13136- per ft $1.80 Ft 1960-87 All GM, Fuel / Return Line Hose with Correct Gas
Made By Inline Tube 1955-81 1/4" Gas Stamped Fuel Hose, with correct gas printing. Printing and Red / Green Pinch Clips. 13 inches of 3/8" hose at
the pump, 6" at the sending unit & 19 inches of 1/4" return hose.

www.Inlinetube.com