Page 191 - Buick-Cadillac Catalog

64-79 Manual Transmission - Clutch

GM Manual Transmission

INL10948 INL10949
64-72 Clutch Rods
Pn# - INL10948 - 1pc $10.75 ea Clutch Rod to Z-bar
1964-72 GM Clutch Adjustment Rod. This is the adjustment rod Pn# - INL13402 - 2pc $5.00 Set
that pushes against the clutch fork. Used to adjust the clutch free
4 Speed Z-bar Bushings play. This is the stock length 6 1/4". 1964-72 GM A-body Z Bar To Clutch Pedal Washers & Clip.
Used to hold the clutch push rod to the Z-bar.
Pn# - INL10949 - 1pc $10.75 ea
INL10417 INL10418 1964-72 GM Clutch Adjustment Rod. This is the adjustment rod INL11888
that pushes against the clutch fork. Used to adjust the clutch free
play. This is the longer length for aftermarket clutches 7 3/8".
INL11891 INL11887
Pn# - INL10417 - 2pc $16.00 ea. 68-72 Clutch Push Rod
1969-71 Cutlass 4 speed Z-bar Bushing & Clip 2pc
Pn# - INL11887 - 2pc $4.50 ea
Pn# - INL10418 - 2pc $16.00 ea. INL11892 1968-72 GM A/F-body Clutch Rod to Clutch Pedal Bushing &
Clip. Used to take out the slop in the pedal clutch rod.
72 Cutlass 4 speed Z-bar Bushing & Clip 2pc
Clutch Adjustment Rod Pn# - INL11888 - 1pc $1.50 ea
Pn# - INL11891 - 4pc $24.00 Set 1968-72 GM A/F-body Clutch Rod & Linkage Clips. Used on the 4
speed rods as a tension clip.
1968-72 GM Clutch Adjustment Rod Stock Length 6 1/4". This is
the adjustment rod that pushes against the clutch fork.
Pn# - INL11892 - 4pc $24.00 Set
1968-72 GM Clutch Adjustment Rod Longer Length 7 3/8". This a
longer adjustment rod that pushes against the clutch fork.
68-72 Z-Bar Rebuild Kit 64-65 Pivot Pin Retainer
Pn# - INL10288 - 8pc $22.00 set Pn# - INL11901 -1pc $2.50 Ea
64-65 GM A-body Clutch / Brake Pedal Pivot Pin Retainer.
68-72 Muncie Z-Bar Rebuild Kit. This is all the pieces that are Used to hold the pivot pin from falling out.
inside the Z-bar shaft and hold the Z- bar to the frame bracket. It
also includes the specal size end washer.
68-72 Clutch Rod Fitting
Pn# - INL10648 - 1pc $15.00 ea
1964-79 4 Speed Manual Trans Clutch Z-Bar Rod Fitting. Used
to adjust the clutch where the threaded rod rests on the clutch arm.
INL10936 INL10937
64-65 Clutch Return Spring
Z Bar Stud Engine Block
Pn# - INL10936 - 1pc $12.00 Ea Pn# - INL11984 - 1pc $13.50 Ea
1964-65 GM A-body Manual Trans Clutch Return Spring. Spring
1964-67, 73-77 GM Ball Stud Clutch Z Bar to Engine Block with INL11888 runs from the clutch fork to exhaust flange.
Seal. Used to hold the 4 speed Z bar to the engine block.
Z Bar Frame Bracket Stud 68-72 Clutch Push Rod
Pn# - INL10937 - 1pc $9.50 Ea Pn# - INL11888 - 1pc $1.50 ea
1964-77 GM Ball Stud Clutch Z Bar to Frame Bracket. Used to 1968-72 GM A-Body Clutch Rod & Linkage Clips. Used on the 4
speed rods as a tension clip.
hold the 4 speed Z bar to the frame pivot bracket.

66-72 Clutch Springs
Pn# - INL13104 - 2pc $14.00 Set
1966-1972 GM A-body Manual Transmission Clutch Return
Springs - Factory correct. The larger black clutch return spring
Manual Trans Clutch Rod runs from the Z-bar to the frame bracket and the small silver anti-
rattle spring holds the clutch fork to the Z-bar so it does not rattle
68-72 442 / GS Z-bar during idle. These springs are often the cause of motor failure on
Pn# - INL13176 - 1pc $59.00 Ea Pn# - INL13025 -1pc $29.00 Ea all speeds or completely.
1968-72 Oldsmobile Cutlass & Buick Skylark Manual
1968-72 Oldsmobile Cutlass / 442, Buick Skylark / GS Manual Transmission Clutch Rod. This rod runs from the clutch Z-bar to New Products In Red
Trans 4 Speed Z Bar. Best Quality on the Market. the clutch pedal in the car and is factory correct.

www.Inlinetube.com