Page 245 - Buick-Cadillac Catalog

Interior - Floor & Package Tray

Rear Seat Speaker Wire 68-72 Trunk Divider Hdt
Pn# - INL11444 -1pc $18.00 Ea Pn# - INL11056-1pc $18.00 Ea 68-72 Package Tray Jute
1965-72 GM A-body, Rear Seat Speaker Wire. Runs from the 1968-72 GM A-body Chevelle, GTO, 442, GS Hardtop Trunk
radio to the rear speaker under the carpet. Divider. This is the trunk divider board to seal off the trunk from the Pn# - INL11053-1pc $10.00 Ea
interior. We have seen with or with out jute padding. 1968-72 Pontiac, Buick Rear Package Tray Jute. This is installed
below the package tray as trunk to body insulation.

68-72 Package Tray Std
Floor Insulation 68-72 Trunk Divider Jute Hdt Pn# - INL11054-1pc $22.00 Ea
1964-72 GM A-body Original Style Paper Backed Floor Insulation. Pn# - INL11045-1pc $11.00 Ea 1968-72 Pontiac, Buick Standard Rear Package Tray - Black. This
has no holes for the rear speakers.
This is the tar paper material that is between the carpet and the 1968-72 GM A-body Chevelle, GTO, 442, GS Hardtop Trunk
floor pan. The paper side faces up. DividerJute. This is glued to trunk divider board to seal off the
Pn# - INL11244 - Set $65.00 Ea trunk from the interior. We have seen the jute either front or rear of
1964-67 Pontiac GTO Paper Backed Floor Insulation. the board.
Pn# - INL11245 - Set $65.00 Ea
1968-72 Pontiac GTO Paper Backed Floor Insulation.
Note: This material is shipped in a roll and must be unrolled at a
temperature of 65 degrees or higher to avoid damage. This is a 68-72 Package Tray Mesh
special order item and can not be returned, so follow the
unpacking directions. Pn# - INL11055-1pc $42.00 Ea
1968-72 Pontiac, Buick Deluxe Rear Speaker Package Tray -
68-72 Trunk Divider Convt Black. Has open holes behind mesh for the rear speakers.
Pn# - INL11057-1pc $18.00 Ea
1968-72 GM A-body Chevelle, GTO, 442, GS ConvertibleTrunk
Divider. This is the trunk divider board to seal off the trunk from the
interior. We have seen with or with out jute padding.
Body Wiring Hold Down Package Tray Corner Screws
Pn# - INL12017 - 1pc $4.25 Ea Pn# - INL12032 - 2pc $1.00 Set
1964-72 GM Interior Body Floor Pan Wiring Hold Down Clips.
Used to hold the body harness to the floor pan, weld or bolt in. 1968-72 GM A-body Interior Rear Package Tray Corner Screws.
Used to hold package tray corners to the body at the rear window.
Pn# - INL12018 - 3pc $12.00 Set
1964-72 GM Interior Body Floor Pan Wiring Hold Down Clips.
Used to hold the body harness to the floor pan, weld or bolt in.
68-72 Trunk Jute Convertible
Pn# - INL11046-1pc $11.00 Ea
1968-72 GM A-body Chevelle, GTO, 442, GS Convt. trunk divider
jute. This is glued to trunk divider board to seal off the trunk from
the interior. We have seen the jute either front or rear of the board.

Package tray blow out clip
Pn# - INL15429 - 1pc $9.50 Ea Inline Tube has been featured in hundreds
1960-72 All GM Rear Package Tray Hold Down Blow Out Clip. of magazines over the years and has
Used on all GM cars to hold the package tray to the metal provided parts for all the top show cars you
underbody. When the trunk was slammed the package tray would find on the pages.
blow up, this clip prevented the blow up. Was on all GM.
68-72 Rear Seat Underlay
Many new products added Pn# - INL10156 -1pc $28.00 Ea Made By Inline Tube
monthy - check back often! 1968-72 GM A-body Under Rear Seat Matt. Used for sound New Products In Red
deadner.

www.Inlinetube.com