Page 19 - Pontiac Catalog

Suspension Parts - Rear End

Suspension Front / Rear, Underbody
B
A

INL12024 INL12037
64-66 Rear Spring Clamps
64-72 Rear Sway Bar Pn# - INL12024 - 2pc $28.00 Set
Pn# - INL13064 -1pc $119.95 Ea 1964-66 GM A-body Chevelle, GTO, 442, GS Rear Spring Hold
Down Clamps. Used to hold the rear coil spring to the rear end
1964-1972 GM A-body Chevelle, GTO, 442, GS Rear 7/8" Factory mounting plate.
64-72 Rear Axle Bumpers 64-66 Rear Spring Bolts
Stock Sway Bar. Must be used with rear boxed lower control arms.
B INL10499 Pn# - INL12037 - 6pc $8.00 Set
1964-66 GM A-body Chevelle, GTO, 442, GS Rear Spring Hold
Down Clamp Bolts. Used to hold the rear coil spring clamp to the
rear end mounting plate.
INL12763 INL12764
64-67 Upper Control Arm 10
Pn# - INL12763 - 1pc $89.00 Ea A INL10955
1964-67 Rear Upper Control Arm With Rubber Bushing For 10
Bolt Rear. These are sold each and do not come with the rear end
housing bushing. Pn# - INL10955 2pc $16.95 Set
64-67 Upper Control Arm 12 1964-77 GM A-body Rear Axle Bumpers with Correct Ribs. Used
on rear axle as a bumper stop when axle bottoms out.
Pn# - INL12764 - 1pc $94.00 Ea
1964-67 Rear Upper Control Arm With Rubber Bushing For 12 Pn# - INL10499 2pc $7.00 Pair 64-66 Spring Insulators
Bolt Rear. These are sold each and do not come with the rear end 64-77 GM A-body Rear Coil Spring Insulators. Insert between the
housing bushing. frame and the top of the spring. Pn# - INL12432 -2pc $22.00 Pr
1964-66 GM A-body ( Chevelle, GTO, 442, Skylark) Rear Coil
Spring Insulators - No imbedded rope and softer.

INL12765 INL12766
68-72 Upper Control Arm 10
Pn# - INL12765 - 1pc $89.00 Ea
1968-72 Rear Upper Control Arm With Rubber Bushing For 10
Bolt Rear. These are sold each and do not come with the rear end
housing bushing. 64-72 Brackets & Bumpers 70-72 Rear Coil Springs
68-72 Upper Control Arm 12 Pn# - INL15251-4pc $49.99 Ea Pn# - INL12045 -2pc $120.00 Pr
1964-72 GM A-Body Aftermarket Rear Axle Housing Weld On
Pn# - INL12766 - 1pc $94.00 Ea Bump Stop Brackets and Bumpers.Aftermarket axles do not have 1970-72 Cutlass, 442, W-30 Rear Coil Springs - These are the
1968-72 Rear Upper Control Arm With Rubber Bushing For 12 these bump stops and no provision for the rubber bumper. factory correct height & spring rate - Inline tube exclusive. They
have been tested in several cars to give factory correct ride height.
Bolt Rear. These are sold each and do not come with the rear end
housing bushing.
INL12626 INL12486

G-body Axle Bumpers
INL10529 INL14818
70-81 Rear Sway Rubbers Pn# - INL15124 - 2pc $19.95 Set
1973-87 GM G-body Chevelle, Monte Carlo, Elcamino, Cutlass,
Pn# - INL15029 - 2pc $12.00 Pr. Grand Prix, Rear Axle Bump Stops. Factory correct with ribs.
1970-81 GM F Body Camaro / Firebird Rear Sway Bar Rubber Bare Steel Paint
Bushing For 1/2" to 5/8 " Bar. Correct Round Hole. Pn# - INL12626 - 1 Can $12.00 Ea
70-81 Rear Sway Brackets Bare Steel Paint. This is the closest match to bare steel color
Pn# - INL14818 2pc $23.00 Pr. paint on the market. Used on: drive shaft, engine parts and as a
base on valve covers, oil pan, and other stamped steel parts.
1970-81 GM F Body Camaro / Firebird Rear Sway Bar Bushing
Coller Brackets. Used to hold the rear bushings in place. Cast Iron Spray Paint
Rear Pinion Bumper Pn# -INL12486 - 1Can $12.00 Ea
The difference in our products: Pn# - INL11295 -1pc $14.00 Ea Cast Iron Spray Paint. Used on cast iron parts: master cylinder,
calipers, phosphate type brackets.
a perfect fit. Keep it Inline. 1968-77 Pontiac, GTO, 1968-72 Chevelle, & 68-72 Oldsmobile For New Products See
Cutlass - Canada Cars Only. Rear Frame Rubber Pinion Bumper.
Bolts to rear frame cross member, used as an axle bump stop. www.InlineTube.com

www.Inlinetube.com