Page 101 - sony camera manule-Book

3 Touch [ ].
flashes quickly. When the white SUPER NIGHTSHOT
balance has been adjusted and stored in The image will be recorded at a maximum
the memory, the indicator stops of 16 times the sensitivity of NightShot
flashing.
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
b Notes
NIGHTSHOT switch (p. 39) is also set to
• Set [WHITE BAL.] to [AUTO] or adjust the ON.
color in [ONE PUSH] under white or cool white
fluorescent lamps. appears on the screen.
• When you select [ONE PUSH], keep shooting a To return to the normal setting, set [SUPER
white object while is flashing quickly. NIGHTSHOT] to [OFF].
• flashes slowly if [ONE PUSH] could not
be set. b Notes
• When [ONE PUSH] was selected, if keeps • Do not use [SUPER NIGHTSHOT] in bright
flashing after touching , set [WHITE BAL.] places. This may cause a malfunction.
to [AUTO].
• Do not cover the infrared port with your fingers
• If you set [WHITE BAL.], [SCENE or other objects (p. 39).
SELECTION] is set to [AUTO].
• Remove the conversion lens (optional).
z Tips • Adjust the focus manually ([FOCUS], p. 98)
when it is hard to focus automatically.
• If you have changed the battery pack while • The shutter speed of your camcorder changes
[AUTO] was selected, or bring your camcorder depending on the brightness, which may result
outdoors from inside the house, or vice versa, in a slowdown of the motion of the image.
select [AUTO] and aim your camcorder at a
nearby white object for about 10 seconds for
better color balance adjustment. FADER
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE You can record a transition with the Customizing your camcorder
SELECTION] settings, or bring your camcorder following effects adding to the interval
outdoors from inside the house, or vice versa, between scenes.
you need to redo the [ONE PUSH] procedure to
readjust the white balance. 1 Select the desired effect in [STBY] (to
fading in) or [REC] (to fading out) mode,
then touch .
COLOR SLOW SHTR
(Color Slow Shutter) 2 Press START/STOP.
The fader indicator stops flashing and
When you set [COLOR SLOW SHTR] to disappears when the fade is complete.
[ON], appears, and you can record an To cancel the fader before starting the
image brighter in color even in dark places. operation, touch [OFF] in step 1.
To cancel [COLOR SLOW SHTR], touch If you press START/STOP, the setting is
[OFF]. canceled.
b Notes
• Adjust the focus manually ([FOCUS], p. 98) Fading out Fading in
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.

Continued , 101