Page 109 - sony camera manule-Book

Batteries/Power sources The battery pack is quickly
discharged.
The power abruptly turns off.
• The temperature of the environment is too
• When approximately 5 minutes have high or low. This is not a malfunction.
elapsed while you do not operate your • The battery pack has not been charged
camcorder, the camcorder is automatically enough. Fully charge the battery again. If
turned off (A.SHUT OFF). Change the the problem persists, replace the battery
setting of [A.SHUT OFF] (p. 95), or turn
pack with a new one (p. 20).
on the power again, or use the AC Adaptor.
• If the time set with [QUICK ON STBY]
(p. 95) has elapsed in the Sleep mode, your LCD screen/viewfinder
camcorder turns off automatically. Turn on
your camcorder again. Menu items are grayed out.
• The battery pack is discharged or running • You cannot select grayed items in the
low. Charge the battery pack (p. 20). current recording/playback situation.
• There are some functions you cannot
activate simultaneously (p. 116).
The CHG (charge) lamp does not
light while the battery pack is being
charged. The buttons do not appear on the
touch panel.
• Slide the POWER switch to OFF (CHG)
(p. 20). • Touch the LCD screen lightly.
• Attach the battery pack to the camcorder • Press DISP/BATT INFO on your
correctly (p. 20). camcorder (or DISPLAY on the Remote
• Connect the power cord (mains lead) to the Commander) (p. 25, 140).
wall outlet (wall socket) properly.
• The battery charge is completed (p. 20). The buttons on the touch panel do
not work correctly or do not work at
The CHG (charge) lamp flashes while all.
the battery pack is being charged. • Adjust the touch panel ([CALIBRATION]) Troubleshooting
• Attach the battery pack to the camcorder (p. 130).
correctly (p. 20). If the problem persists,
disconnect the AC Adaptor from the wall The image in the viewfinder is not
outlet (wall socket) and contact your Sony clear.
dealer. The battery pack may be damaged.
• Pull out the viewfinder, then move the
viewfinder lens adjustment lever until the
The remaining battery time indicator image appears clearly (p. 25).
does not indicate the correct time.
• The temperature of the environment is too The image in the viewfinder has
high or too low. This is not a malfunction.
disappeared.
• The battery pack has not been charged
• Close the LCD panel. No image is
enough. Fully charge the battery again. If
the problem persists, replace the battery displayed in the viewfinder when the LCD
panel is open (p. 25).
pack with a new one (p. 20).
• The indicated time may not be correct
depending on the environment of use.
Continued , 109