Page 87 - sony camera manule-Book
P. 87

OFF (  )
                                        FACE DETECTION
         Records without flash.
                                       Adjusts the focus/color/exposure of face
       b Notes
                                       images automatically. Also, adjusts face
       • The recommended distance to the subject when   images for clear viewing.
        using the built-in flash is approximately 0.3 to
        2.5 m (1 to 8 feet).           B ON (  )
       • Remove any dust from the surface of the flash   Detects face images in frames, then adjusts
        lamp before using it. Flash effect may be   their image quality automatically.
        impaired if heat discoloration or dust obscures
                                            Face detection frame
        the lamp.
       •  /CHG lamp (p. 137) flickers while charging
        the flash, and remains lit when charging is
        complete.
       • If you use the flash when shooting a backlit
        subject or in bright places, the flash may not be
        effective.
        FLASH LEVEL                         Face detection icon
                                         ON [NO FRAMES] (  )
       You can set this function when you shoot
       still images using the built-in flash, or an   Detects face images without frames, then
       external flash (optional) that is compatible   adjusts their image quality automatically.
       with your camcorder.              OFF
         HIGH(  )                        Face images are no detected.
         Makes the flash level higher.  b Notes
       B NORMAL( )                     • Your camcorder may not be able to detect face   Customizing your camcorder
                                        images depending on the recording condition.
         LOW(  )                       • Your camcorder may not be able to optimize the
         Makes the flash level lower.   images depending on the recording condition. In
                                        this case, set [FACE DETECTION] to [OFF].
        REDEYE REDUC
                                          INDEX SET
       You can set this function when you shoot
       still images using the built-in flash, or an   The camcorder detects faces automatically
       external flash (optional) that is compatible   during movie recording. The default setting
       with your camcorder.            is [ON].
       Set [REDEYE REDUC] to [ON], then set   Face icons and their meanings
       [FLASH MODE] (p. 86) to [AUTO] or    : This icon appears when the setting is
       [ON] to display   .                 [ON].
       You can prevent redeye by activating the    : This icon flashes when your
       flash before recording.
                                           camcorder detects a face. The icon
       b Notes                             stops flashing when the face is
                                           recorded in the Face Index.
       • The redeye reduction may not produce the
        desired effect due to individual differences and    : This icon appears when faces cannot
        other conditions.                  be recorded in the Face Index.

                                                          Continued ,  87
   82   83   84   85   86   87   88   89   90   91   92