Page 14 - FAT 105 4.17 MOODLE

person that could become trapped in the
machine while it is running.

• Perimeter – Create a perimeter around
the machine. You want a clear space
around the machine so you and the work-
piece have room to move freely around it.
You will also want to keep the perimeter
clear of dirt, debris, chips, and cutting flu-
id that could cause a slip-and-fall injury.
You will want at least a 2-foot perimeter
around all machines.

• Guards and Safeties – Do not remove
or disable any guard or safety on the ma-
chine. They are there for your protection.
Disabling safeties and removing guards
may lead to an insurance liability if some-
one is injured, and may void the machine's
warranty.

• Holding and Adjustments – Tooling
(bits and cutters) and parts should be se-
curely held in place while the machine
is running, and any adjustments should
be made with the machine turned off. If
tooling or the part is not secure, you run
the risk of damaging the part or break-
ing the tooling and possibly the machine
itself. Tooling should be locked into the
chuck or holder and parts need to be
clamped to the work table or securely in
a jig or vise. To avoid injury, never make
any adjustments to the machine or tool-
ing while the machine is running. Make
sure the tooling is secure every time you
make an adjustment.

Always remember to remove and chuck keys,
wrenches, and other tools from the machine be-
fore startup. Make sure the machine is turned
off before making any adjustments or taking
any measurements. Never try to stop the ma-
chine by hand while it is running — you will
lose every time.

10