Page 52 - Peter Randall "The Craft of the Knot.."
P. 52

STEP  1 Tie  an  Overhand  Knot  in  the  end  of  one  rope,  then  take  a
               second rope and trace it through the knot in the opposite direction.














               STEP 2 Continue tracing along the reverse path until both ropes form
               the Overhand Knot.













               STEP 3 Tighten the knot by pulling on both ends.








                  The Water Knot is difficult to untie after being under strain. If you use

               flat material to tie this knot, be careful that the straps don’t make a twist
               inside the knot, but that they lay down flat together, as in Step 3.




               ZEPPELIN BEND


               The Zeppelin Bend, also known as the Rosendahl Bend, is a good sailing

               bend to learn.

               STEP 1 To start, place two ropes together and use one of the running

               ends to make a loop as shown in the illustration.
   47   48   49   50   51   52   53   54   55   56   57