Page 223 - IE.IE Limited - Sealey Tools Catalogue

223
A
2tonne
80mm
B
85mm
C
D
3.25tonne
mm
2.75tonne
90
90mm
2.5tonne
Trolley Jacks
A Trolley Jack 2tonne Low Entry Super Rocket Lift
Model No. 2000LEQ
Low entry to suit vehicles with low ground clearance. One-piece hydraulic unit. Two-piece handle with integral cog-type release mechanism. Super Rocket Lift feature brings lifting arm into contact with jacking point with two or less strokes of the handle. Integral saddle pad provides protection for the jacking point. Heavy-duty swivel castor and Ø72mm x 44mm wide front wheels.
Replacement Rubber Jack Pad: SSP223
B Trolley Jack 2.5tonne Low Entry Model No. 2500LE
Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Integral release mechanism prevents inadvertent lowering of saddle.
C - D Trolley Jacks Low Entry Rocket Lift
Model No. SEE BELOW
Twin piston Rocket Lift feature brings lifting arm straight into contact with the jacking point in 3-4 strokes. Universal joint release mechanism allows safer, more controlled lowering of the jack. Profiled lifting arm gives low clearance height of just 90mm x 390mm deep, making this unit suitable for sports and custom cars. Heavy-duty chassis with strengthening flanges along the side for extra torsional rigidity under load. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Supplied with foam jacking handle sleeve to prevent damage to the vehicle’s bodywork and integral saddle pad.
80mm
E
Lift height comparison.
E Trolley Jack 2tonne High Lift Low Entry
Model No. 2200HL
High lift jack arm with incredible low access height of just 80mm. Fitted with quick lift foot pedal and dead man’s control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.
EE
2tonne
E
Model No:
Capacity: 2tonne
2000LEQ
ABCDE
2500LE
2.5tonne 80mm 85mm 375mm 450mm 92mm 155mm 860mm 600mm
2750LE
2.75tonne 90mm 520mm 145mm 700mm 43kg
3250LE
3.25tonne 90mm 530mm 152mm 700mm 45.5kg
2200HL
2tonne 80mm 805mm 220mm 950mm 51kg
Minimum Saddle Height: Maximum Saddle Height: Maximum Chassis Height: Overall Length
Weight: 41kg
For our full range of Axle Stands, see pages 232 to 234
34kg