Page 224 - IE.IE Limited - Sealey Tools Catalogue

224
Trolley Jacks
Safety System
Safety locking system that involves inserting a steel bar into the jack at specific points. This feature is an additional fail-safe for prolonged use.
Safety System
Automatic safety locking system that activates at predetermined lifting heights. This feature is an additional fail-safe for prolonged use.
A
2tonne
Safety System
Suitable for lifting cars as a traditional trolley jack.
Suitable for lifting motorbikes.
Suitable for lifting quad bikes.
A Combination Trolley Jack 2tonne Model No. 2000CJX
Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long two-piece handle. Heavy-duty castors are fitted with brakes so this jack can be used as a quad or bike lift as well as a standard jack. Large saddle design to ease positioning under vehicle. Removable saddle to improve stability and safety when lifting motorcycles and quad bikes. Additional rubber gripped padding on the lifting plates increases stability. Features solid stainless steel locking pin to lock jack in raised position for prolonged use and reduce pressure on the hydraulics when at maximum height. Fitted with safety overload valve and pump through valve to prevent handle locking at maximum ram extension.
Capacity:
Minimum Height (with Saddle):
Maximum Height (with Saddle):
Minimum Height (without Saddle):
Maximum Height (without Saddle):
Maximum Chassis Height:
Length:
Weight: 37kg
2tonne 160mm 445mm 150mm 435mm 165mm 570mm
Locking Pin.
B
D NEW
Air Jack/Stand 10tonne
C
3tonne
Safety System
Safety System
10tonne
2tonne
Safety System
B
Trolley Jack 2tonne with Safety Lock
C
Trolley Jack 3tonne with Safety Lock
Model No. 2000LJ
Steel framed 2tonne locking jack with a three position safety locking mechanism that provides additional load security and hydraulic system fail safe. Automatic bypass prevents jack damage from over pumping. For safety reasons always use jacks in conjunction with axle stands in pairs.
Capacity: 2tonne
Model No. 3000LJ
Steel framed 3tonne locking jack with a three position safety locking mechanism that provides additional load security and hydraulic system fail safe. Automatic bypass prevents jack damage from over pumping. For safety reasons, always use in conjunction with axle stands in pairs.
Capacity: 3tonne
D
Locking Position 1: Locking Position 2: Locking Position 3: Minimum Saddle Height: Maximum Saddle Height: Maximum Chassis Height: Length:
Weight:
B
225mm 295mm 350mm 135mm 395mm 145mm 535mm
13kg
Locking Position Height 1: Locking Position Height 2: Locking Position Height 3: Minimum Saddle Height: Maximum Saddle Height: Maximum Chassis Height: Length:
Weight:
C
325mm 405mm 470mm 145mm 505mm 190mm 690mm
37kg
Model No. AJS10000
Ideal for workshop use, this jack doubles up as an axle stand to take the effort out of lifting and holding heavy plant, tractors and commercial vehicles. Multiple lifting and locking positions achieved using extension tube with multi-position pin support. Removable two piece handle aids easy storage. Requires 200psi of air pressure to reach optimum performance.
Maximum Capacity:
Minimum Height:
Maximum Height (inc. Extension): Extension:
Piston Stroke:
Working Pressure:
Length including Handle:
Weight:
10tonne 447mm 1300mm 561mm 292mm 200psi 1480mm 80kg
AXLE STANDS
See our full range of axle stands see pages 232 to 234.
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk