Page 236 - IE.IE Limited - Sealey Tools Catalogue

236
Jacking Beams
A Wide Arm Jacking Beam 2tonne Model No. SJBEX200
Fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point.
A
2tonne
Capacity:
Support Arm Reach: Beam Lift:
Load Arm Reach: Weight:
2tonne 780-1075mm 95-300mm 850-1600mm 94kg
B Wide Arm Jacking Beam 3tonne Model No. SJBEX300
Fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point.
B
3tonne
Capacity:
Support Arm Reach: Beam Lift:
Load Arm Reach: Weight:
3tonne 780-1075mm 95-300mm 850-1600mm 102kg
C Wide Arm Jacking Beam 2tonne Low Profile
Model No. SJBEX200LP
Low profile design permits use on lifts mounted in pits and commonly used in ATLs. Also permits use on vehicles with low ground clearance. Fitted with large diameter roller support arms for use on lifts with inner rail type configuration. Ultra wide configuration arms extend to 1.65mtr and feature adjustable saddles with interchangeable height posts (optional). Tried and tested hydraulic system with double stroke pump and two-stage mechanical lock for added safety. Capacity:
Support Arm Reach: Beam Lift:
Load Arm Reach: Weight:
Optional Accessories:
Extension Lift Adaptor 100mm (Pair):
SJBEXLP100A Flat Arm Set - Spring Loaded: SJBEXLPFLA
D Extension Lift Adaptor (Pair) Model No. SJBEXLP100A
Extension adaptors for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.
C
2tonne
2tonne 720-1075mm 35-380mm 760-1650mm 97kg
D
E
F
Convex Mirror Ø450mm Wall Mounting
Model No. CM400
Convex mirror for improved visibility. Supplied with wall fixing and swivel joint, allowing for quick and easy positioning. Ideal for use as a safety or security mirror.
Diameter: 450mm
E
Flat Arm Set - Spring Loaded
F
Capacity: Extension Length:
2tonne 100mm
Model No. SJBEXLPFLA
Spring loaded flat arms with roller bearings for use
with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.
Capacity: 2tonne
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk