Page 545 - IE.IE Limited - Sealey Tools Catalogue

Steering Rack Tools
545
B
C
A
A Steering Rack Knuckle Tool Set 4pc Model No. VS4003
Suitable for the fast removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Three interchangeable heads fit racks with hex drive, two flats and round ends with a diameter of 30 to 45mm.
Length: 405mm Internal Sleeve Length: 380mm Drive: 32mm Hex, 1/2"Sq Head Sizes: Ø30-35mm, Ø35-40mm, Ø40-45mm
D Track Rod Adjusting Grips Model No. VS4005
Designed for loosening and adjusting stubborn track rods when making repairs or adjusting the wheel alignment. Ideal when the tie-rod has no hex or flats and a spanner cannot be used. Features a spring loaded jaw which grips tighter as more force is applied. Length: 410mm
B - C Steering Rack Knuckle Tools Model No. SEE BELOW
Suitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends.
B Model No: VS4001 Length: 470mm
C Model No: VS4002 Length: 400mm
Internal Sleeve Length: Drive:
Head Size:
440mm 27mm Hex & 1/2"Sq Ø35.5-41mm
Internal Sleeve Length: Drive:
Head Size:
360mm 27mm Hex & 1/2"Sq Ø29-34mm
E
G
F
D
Maximum Capacity:
22mm
E - F Steering Rack Knuckle Tools Model No. SEE BELOW
Suitable for fast and easy removal of the steering knuckle. Fits racks with hex drive, two flats and round ends. Ideal for vehicles with limited access and avoids the need to remove the rack assembly.
G SubframeLocatingPinSet4pc-VAG Model No. VS3900
Set of four subframe locating pins allows precise alignment of the subframe to the vehicle’s chassis. Compatible with a wide variety of Audi and VW vehicles.
OEM Tool: T10096 Applications: Audi; A3 (04on), TT (07on), VW; EOS (06on), Fox (06on), Golf (09on), Golf Plus (05on), Jetta (04-06), Passat (06on), Passat CL (09on), Polo (02on), Scirocco (09on)
I Suspension Roller Bar Model No. VS3816
Simple but ingenious tool that tests for movement and wear in suspension components such as ball joints, bearings and bushes. Lower the road wheel on the roller bar using a 1/2"Sq drive breaker bar to rock the road wheel to highlight any movement. Ideal for use on a platform ramp.
Length: 350mm Diameter: Ø36mm
E Model No: Drive:
Head Size:
F Model No: Drive:
VS4000
19mm Hex Ø33-41mm VS4004 19mm Hex Ø40-54mm
H
MECHANIC’S GLOVES See page 1025 for details of our Mechanic’s Gloves.
Head Size:
H
I
H Suspension Arm Lever Model No. VS3815
Suitable for the in situ separation of suspension components with minimum manual effort and maximum efficiency. Fully adjustable fulcrum position allows for use in a variety of positions and caters for left or right- handed use.
Length: 1.21mtr
For our full range of Ratchet Wrenches, see pages 68 to 73