Page 546 - IE.IE Limited - Sealey Tools Catalogue

546
Wheel Alignment Tools
A Camber, Castor & Kingpin Gauge Set Model No. GA42
Aluminium gauge bodies with chemically blackened wheel stud locators. Measures wheel geometry by attaching calibrated bubble levels to the wheel studs. For accurate results, these tools should be used with Model No. GA44 Steering Turntables. Supplied in a steel case together with operating instructions.
A
C
B Steering Turntables Model No. GA44
Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment. Also measures toe-in/out and full lock angles. Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements. Measures up to 45o rotation in either direction. Maximum loading 1360kg per pair.
Range: ±45°
B
A
Table Diameter: Table Height: Table Movement: 50mm Side-to-Side Capacity:
Ø343mm 50mm 63mm Front-to-Back,
1360kg pair, 680kg each
C
D
C Magnetic Camber Castor & Kingpin Gauge
Model No. GA450
Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination. Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement, and one for adjusting kingpin inclination. Camber gauge with fixed graduation from -5° to +5°. Adjustable castor gauge graduated from -3° to +11°. Kingpin gauge graduated from 0° to 14° left to right. Supplied in carry-case.
D Wheel Balancer - Manual Model No. GA10
Suitable for balancing all types of wheels with hubs from Ø115mm. Simple to use and requires no power source.
Minimum Hub Diameter:
F
Camber Gauge Graduation: Castor Gauge Graduation: Kingpin Gauge Graduation: Magnetic Plate Diameter:
-5° to +5° -3° to +11° 0° to 14° Ø85mm
Ø115mm
G
127kg
E NEW
Steering Wheel Level
F
Magnetic Camber/Castor Gauge
Model No. GA45
Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles. Large adjuster knob for convenient zeroing of bubble during castor angle measurement. Graduated from -6° to +6°. Supplied in carry-case.
E
Adjustment:
G Wheel & Tyre Handling Dolly 127kg Capacity
Model No. TH002
-6° to +6°
Model No. GA460
Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70. Self-retaining and centring using a spring loaded mechanism. Features a level bubble to show horizontal position. Suitable for steering wheels with an internal diameter of between 270mm and 340mm.
Enables commercial sized wheels and tyres to be removed/installed on hub studs.
Capacity: 127kg Fork Centres: 535mm Length: 1255mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk