Page 557 - IE.IE Limited - Sealey Tools Catalogue

Ball Joint Splitters
Suspension Tools
557
B
12tonne
A
12tonne
A Ball Joint Splitter Hydraulic & Manual - Commercial Model No. VS3813
Heavy-duty ball joint splitter suitable for commercial vehicles. Specially designed to be operated manually or by 12tonne hydraulic ram (supplied). Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram. Hydraulic ram interchangeable with Model No. PS990.
B Ball Joint Splitter Hydraulic & Manual 9pc - Commercial Model No. VS3814
Heavy-duty ball joint splitter with interchangeable jaws. Enables operator to select correct jaw size without taking entire splitter to vehicle. Use manually or with 12tonne hydraulic ram (supplied).
Jaw Capacity:
Jaw Capacity:
Jaw Opening Capacity:
35mm 100mm
Jaw Opening Capacity: Thrust Screw Lengths: Pivot Rod Length:
Small; 30mm, Medium; 34mm, Large; 40mm 95mm 82, 100mm 125mm
C
1.5tonne
F
D
E
C Ball Joint Splitter Hydraulic Light Commercial
Model No. VS3811
Forged steel body ball joint splitter suitable for light commercial vehicles. Specially designed to be operated manually or by 1.5tonne hydraulic ram supplied. Features a step down thread adaptor that allows fitting of the manual thrust screw.
D - E
Model No. SEE BELOW
Chemically blackened forged steel body with thrust bolt. High strength construction, suitable for commercial vehicle ball joints.
Model No:
Lower Ball Joint Remover/Installer 14pc Mercedes, Renault
Model No. VS1274
Suitable for in situ removal and installation of front lower ball joints on Mercedes W220, W211, W230 and Renault Megane. No need to disassemble. Also includes a selection of multipurpose sleeves, which have various automotive applications. Use with ratchet wrench.
Applications: Mercedes; W220 S-Class 98-06, W211 E-Class 02-09, W230 SL 02on, Renault; Megane (02-08 with 18mm ball pin)
F
Jaw Capacity:
19mm
Jaw Capacity:
External Sleeve Sizes:
Ø50.5, 63.5, 76mm
G
I
D VS3804 E VS3805
H
H Lower Ball Joint Socket Citroen & Peugeot 405 Model No. SX027
34mm 42mm
G Ball Joint Splitter - Commercial Model No. VS3812
Heat treated alloy steel socket. 35mm Hex drive with Ø19mm internal clearance for OEM and non-OEM fittings. Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange. Suitable for Citroen and Peugeot 405 lower ball joints.
I Lower Ball Joint Socket Set 2pc Model No. SX0271
Set of two heat treated alloy steel sockets. Suitable for removal of OEM and aftermarket lower ball joints on Citroen and Peugeot vehicles. Supplied in carry-case. Applications: Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607
Chemically blackened forged steel body with thrust bolt. Suitable for commercial applications.
Jaw Capacity: 65mm
For our full range of Impact Wrenches, see pages 626 to 632