Page 558 - IE.IE Limited - Sealey Tools Catalogue

558
Wheel Bearing Tools
A-D Front Wheel Bearing GEN2 Removal/Installation Kits Model No. SEE BELOW
E
Wheel Bearing Inner Race Puller
GEN1
Double row contact bearing.
GEN2
Hub unit with bearing
(Single Flange).
GEN3
Hub unit with bearing (Double Flange).
A selection of kits designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures the bearing into the housing. Each kit is individually designed to suit the relevant vehicle manufacturer. These kits can be used in situ when replacing the front wheel bearing. Knowledge of the outer bearing diameter is required before selecting the appropriate kit, as some vehicles are fitted with more than one size of bearing.
E
A
A
B
B
F
Model No. VS7027 Bearing Size:
Applications:
62mm Audi; A2 1.2TDi PD (01-05),
Model No. VS7028
Bearing Size: 66mm
Applications: Skoda; Fabia (00-12), VW; Fox (05-10), Polo (02-09)
Model No. VS7025
Designed for the removal of the wheel bearing inner race from the vehicle hub. Usually the inner race is cut from the hub - using this tool saves time and reduces the likelihood of damage. The puller’s unique leg design allows it to fit between the inner race and hub. Features a locking mechanism to locate and hold the legs in the correct position. Suitable for most vehicle hubs.
Capacity: Ø40-110mm
F Universal Press Support Block Model No. VS7036
Designed to be used with a standard workshop press. Multiple threaded holes in aluminium base plate enable the support bars to be installed in virtually any position, allowing the bearing or bush to be positioned horizontally. Includes a packing block for added versatility. Ideal for the removal of wheel bearings and bushes.
Aluminium Base Plate Size (L x W x H):
250 x 200 x 40mm
Aluminium Packing Block Size (L x W x H):
VW; Lupo 3L 1.2TDi PD (01-06)
D
D
C
C
Model No. VS7029
Bearing Size: 72mm
Applications: Audi; A1 (10on), A2 (00-05), Seat; Cordoba (03-09), Ibiza (02-12), Skoda; Fabia (00-12), Roomster (06-12), VW; Fox (05-10), Polo (02-12)
G Impact Hub Nut Socket Set 3pc Model No. SX051
Heavy-duty, high quality, 12-point, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool. Blackened finish for added corrosion resistance. Tool suitable for hub nut applications where high torque is required.
Drive: 1/2"Sq Contents: 30, 32, 36mm
Model No. VS7030
Bearing Size: 78mm Applications: Ford; C-Max (07-11), Focus II (04-11), Focus C-Max (03-07), Mazda; 3 (03-05), Volvo; C30 (06-10), C70 (05-10), S40 (04-12), V50 (04-10)
H
NEW
G
Support Bar Lengths:
190mm (x1)
H
200 x 70 x 40mm 110mm (x1), 150mm (x3),
H Adjustable Press Support Plate Model No. VS7037
Designed to be used with a standard workshop press. Adjustable diameter and six interchangeable support legs provide quick alignment of hub or suspension frame for secure and level pressing. Ideal when removing and installing wheel bearings and bushes. Operating Diameter: Ø78-100mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk