Page 587 - IE.IE Limited - Sealey Tools Catalogue

Pullers
587
A Hydraulic Puller Set 19pc Model No. PS981
Forged steel 2-way yoke allows twin or triple leg pulls. 10tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears and bearings. Three 3-position puller arms and three sets of extension plates, supplied in carry-case. Hydraulic ram interchangeable with others in series.
Puller Type: 2 Legged
Size: Spread:
Reach:
0-100mm 0-150mm 0-200mm 0-250mm
Reach:
0-100mm 0-150mm 0-200mm 0-250mm
100mm
150mm
200mm
250mm
Puller Type: 3 Legged
Size: Spread:
50-100mm
75-150mm 100-200mm 150-250mm
100mm 150mm 200mm 250mm
50-100mm
75-150mm 100-200mm 150-250mm
A
10tonne
B
10tonne
B
B
A
B Hydraulic Puller Set 25pc Model No. PS982
Master set of gear pullers and bearing separators supplied in carry-case. Forged steel bearing separator. 10tonne Hydraulic ram compatible with B other sets in the range.
Contents: 10tonne Hydraulic Ram, 100mm Leg (x3), 150mm Leg (x3), 200mm Leg (x3), Twin Head, Triple Head, Extension Rod; 25 x 50mm (x1), 25 x 100mm (x1), Main Rod; 200mm (x4), Beam, Separator 75-105mm, Bolt 5/8", Ram Service Kit, Ram Nut
A
D
10tonne
10tonne
E
C
10tonne
C Hydraulic Ram Unit Model No. PS990
Hydraulic ram piston fits all Sealey hydraulic puller sets and is also suitable for use with other popular makes of hydraulic gear pullers. Screw mechanism converts power to 10tonne ram head with enough force to remove most stubborn bearings, pulleys and shafts.
Compatible with:
VSE127H
PS980, PS981, PS982, PS985,
D
E
PS980 and PS985 are supplied in strong, steel cases.
D Hydraulic Bearing Separator/Puller Set 8pc
Model No. PS980
Cast puller yoke with forged separator. 10tonne Hydraulic ram interchangeable with other units in the series. Supplied with Ø75-105mm bearing separator. Maximum puller depth 420mm. Supplied in steel case.
Contents: 10tonne Hydraulic Ram, Separator Ø75-105mm, Bolt 5/8", Extension Rod 200mm (x4), Cross Beam
E Hydraulic Bearing Separator/Puller Set 10pc
Model No. PS985
Cast puller yoke with forged separator. Supplied with 10tonne hydraulic ram. Suitable for pulling commercial vehicle size bearings from Ø120-150mm. Hydraulic ram interchangeable with other sets in the range. Maximum depth 420mm. Supplied in steel case. Contents: 10tonne Hydraulic Ram, Separator Ø120-150mm, Plug, Extension Rod 250mm (x4), Cross Beam
For our full range of Wheel Bearing & Bush Removal Tools, see pages 558 to 560