Page 908 - IE.IE Limited - Sealey Tools Catalogue

908
Pillar Drills
ABC
16mm
16mm
16mm
B
C
A-C Floor Standing Pillar Drills Model No. SEE RIGHT
For a small premium over the cost of a bench drill, you can avoid tying up valuable bench space. These drills have adjustable tilting tables and rise and fall height adjustment by rack and pinion. All models are fully CE certificated and approved for use in educational establishments and the industrial workplace. Mortise attachment available, see page 907.
Model No:
Drilling Capacity (Chuck Size):
Spindle Nose Taper:
Swing: 314mm
GDM200F
16mm MT2 436mm 178mm 80mm 16 120-3000rpm 800mm 1230mm Ø310mm 205 x 205mm 460 x 275mm Ø80mm Ø60mm 1630mm 450W (650W) 230V 75kg GDMX/KC
A
GDM140F GDM160F
Spindle Centre to Column: Spindle Travel:
Number of Speeds:
Speed Range:
16mm 16mm MT2 MT2 394mm 162mm 80mm 16 210-3340rpm 790mm 1220mm Ø310mm 200 x 185mm 440 x 260mm Ø70mm Ø55mm 1580mm 350W (550W) 230V 61kg GDMX/KC
127mm 60mm 12 210-2580rpm 780mm 1150mm Ø250mm 195 x 180mm 420 x 250mm Ø60mm Ø60mm 1530mm 220W (370W) Supply: 230V Weight: 53kg
Maximum Distance Spindle to Table: Maximum Distance Spindle to Base: Working Table Surface Size: Working Base Surface Size:
SAFETY GUARDS
Safety guards are supplied with all pillar drills (replacements available on page 906). Please note that any drill used on premises covered by the Health & Safety at Work Act MUST be fitted with a safety guard.
Overall Base Size: Column Diameter: Collar Diameter: Overall Height: Motor Power (Start):
D
E
F
D Drill Vices
Model No. SEE BELOW
Cast construction with machined foot and articulated threaded handle. Fitted with replaceable steel jaws. Model No: Jaw Width: Jaw Depth: Jaw Opening:
GDMX/KC
F 3-Way Drill Vice Model No. DV3D
Optional Keyless Chuck 16mm:
E Deluxe Drill Vices Model No. SEE BELOW
Steel construction with stepped jaws and machined foot. Suitable for hand-held use or for drill table mounting using two bolt-slides machined into the casting. Fitted with replaceable jaws.
Model No: Jaw Width: Jaw Depth: Jaw Opening: 100DV 100mm 30mm 90/100mm 120DV 132mm 38mm 120/130mm
DPV2.5 65mm DPV3 75mm DPV4 100mm DPV5 125mm DPV6 150mm
22mm 55mm 20mm 75mm 30mm 110mm 30mm 130mm 30mm 145mm
3-Way mounting, on side, end or base. Recommended for use on any pillar drill, milling machine or surface grinder. Accurately ground surfaces ensure squareness in three planes.
Jaw Width: 100mm Jaw Depth: 30mm Jaw Opening: 90mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk