Page 909 - IE.IE Limited - Sealey Tools Catalogue

Pillar Drills
909
A
16mm
BC
16mm
16mm
B
C
The heads of both models can be rotated through 135° and have a positive lock in the vertical position. Heads can also be swung through 360°.
B - C Radial Arm Pillar Drills Model No. SEE BELOW
Heavy-duty construction. Safety devices fitted include a no-volt release switch and pulley cover cut-out microswitch. Radial feature allows off-table drilling and angle drilling. Features a maximum throat depth of 420mm. Radial arm controlled by rack and pinion assembly allowing fine positioning of drill bit. Available as bench mounting or floor standing type.
Model No:
Drilling Capacity (Chuck Size):
Spindle Nose Taper:
Maximum Swing:
Maximum Distance Spindle Centre to Column:
Radial Arm Travel:
Spindle Travel:
Number of Speeds:
Speed Range:
Working Table Surface Size:
Working Base Surface Size:
Overall Base Size:
Column Diameter:
Collar Diameter:
Overall Height:
Motor Power (Start):
Supply: 230V Weight: 47kg Optional Keyless Chuck 16mm: GDMX/KC
C
B
A
A
Variable Speed Floor Standing Pillar Drill
Model No. GDM200F/VS
Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance. The belt transmission uses two spring tensioned cone pulleys, the diameters of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever. Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments. Supplied with chuck guard.
Drilling Capacity (Chuck Size): 16mm Spindle Nose Taper: MT2 Swing: 436mm
BC
178mm 80mm Variable 150-2300rpm 800mm 1230mm Ø310mm 205 x 205mm 460 x 275mm Ø80mm Ø60mm 1630mm 450W (650W) Supply: 230V Weight: 81kg Optional Keyless Chuck 16mm: GDMX/KC
16mm MT2 940mm 440mm 320mm 80mm 5 500-2450rpm Ø310mm 155 x 165mm 340 x 210mm Ø60mm Ø60mm 790mm 350W (550W)
Spindle Centre to Column: Spindle Travel:
Number of Speeds:
Speed Range:
GDM790BR
GDM1630FR
16mm MT2 921mm 425mm 315mm 80mm 5 500-2450rpm Ø310mm 195 x 180mm 420 x 250mm Ø71mm Ø60mm 1630mm 350W (550W) 230V 65kg GDMX/KC
Maximum Distance Spindle to Table: Maximum Distance Spindle to Base: Working Table Surface Size: Working Base Surface Size:
Overall Base Size: Column Diameter: Collar Diameter: Overall Height: Motor Power (Start):
For our full range of Drill Bits, see pages 1085 to 1088