Page 100 - Quicksilver Accesories Guide 2019

OUTBOARD

FILL CAP O-RING BULK OIL FILL HOSE OUTBOARD

25- 11332 32-850719
Replacement O‑Ring for Fill Cap Helical corrugated cover, helical non‑metallic reinforcement, smooth wall PVC. 1
2.225 x .210 1/2 " (38 mm) x 100 ft. (30 m)
For use with a deck oil fill kit and the 1.8 US gal (6.8 L) or 3 US gal (11 L) remote
DECK FILL KIT - OIL (STRAIGHT ELBOW) oil tank reservoirs. This kit must NOT be used with Auto Blend.
FRONT LOW WATER PICK-UP PLUG KIT

Used in special applications where debris is plugging the low water
pick‑ups in the nose of the gearcase. This will also limit the amount of
cooling water flow. Do not use this kit if the side water pick‑ups are out
of the water when the boat is on plain.

WATER INLET PLUG KIT

15969A13 895764A01
Comes with deck fittings, filler cap and mounting hardware. Oil fill hose must be Contains two plugs, o‑ring and shift shaft gasket.
ordered separately to complete the assembly. Plugs the front low water pick‑up on the gearcase for the 3.0L EFI/Optimax
For use with 1.8 US gal (6.8 L) or 3 US gal (11 L) remote oil tank reservoirs. This outboards with the shift shaft bushing assembly that is fastened with 2 screws.
kit must NOT be used with Auto Blend.
WATER INLET PLUG KIT
DECK FILL KIT - OIL (80 DEGREE ELBOW)

8M0052921
15969A11 Contains plugs and gasket to seal the low water pickups from injesting debris into
Comes with deck fittings, filler cap and mounting hardware. Oil fill hose must be the engine water cooling passages.
ordered separately to complete the assembly. Fits the Verado gearcase and the Torquemaster II with the shift shaft bushing
For use with 1.8 US gal (6.8 L) or 3 US gal (11 L) remote oil tank reservoirs. This fastened with 4 screws.
kit must NOT be used with Auto Blend.

Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. 93
For more information, please contact your local Mercury, Mariner, MerCruiser or
Quicksilver Office.