Page 250 - Arrow Distributing 2018 Parts & Accessories Catalog

248 • Electrical • Section 8

Battery Isolator Battery Top Mount
Isolates starting battery. Isolator Horizontal
Assures you of primary
battery power for starting NOCO High-Performance Lever
engine and provides Battery Isolators are Opens and closes
secondary battery current designed with the latest solid-state technology to horizontally where
for auxiliary power. Fits meet the increasing power demands placed on clearance above battery
Electrical • Section 8
all your needs. 3 terminal alternators. The HP Series Battery Isolators eliminate is limited. Protect vehicles and equipment against
for metal frame ground systems. 4 terminal battery multiple battery drain, allow simultaneous charging electrical system fires, tampering, theft and battery
switch has insulated ground terminal for use with of multiple battery banks, and fits virtually all makes drain. Installs on negative post. Comes with post for
fiberglass or other non-conductive materials. and models. For use with negative ground, 12-48 receiving standard batter cable clamp. Rated 250-
Cadmium plated, non-breakable heavy duty VDC, Nominal systems. Available in 90, 140, and 200 AMPs continuous and 750-AMPs surge at 12-volts.
housing. Resists rust, gives long life in most any amp. models. Mounting Hardware and Instructions 210868 20108 Low Profile - Top Post $34.83
environment. Includes terminal nuts and lock Included.
washers. 210553 1G140HP 140-AMP Battery Isolator $114.67
210846 7000S 3-Term $31.11
Battery Switch
210847 7001S 4-Term Battery Switch $32.15 Battery
210841 7000 3-Term Battery Switch $28.08 Disconnect
210842 7001 4-Term Battery Switch $32.86 Terminal Disconnect
Safety switch designed to Noco Terminal Disconnects are
protect vehicles and equipment designed to cut off power to the
from tampering, theft, and
battery drain. Surface mounted battery to avoid unauthorized use
"in-line". of your vehicle or battery
consumption when not used for
Starter Solenoid 210860 20188 In Line Remote $32.54 long periods of time. For
Continuous Duty 100 3-3/4" x 2-1/4" x 2" use in 12 or 24 VDC systems.
amp service. 12-V 210863 20148 Top Mount W/Wing $37.19 210850 ID220 Terminal Disconnect $6.99
Continuous Duty Nut 3" x 4" x 2-1/4"
Solenoid Insulated, 210864 20128 Side Mount For GM Type $34.83
with hardware. Flat Side Terminals 3-3/4"
Bracket. Replaces: x 3-1/3" x 1-1/4"
Delco 1114218, 223; 210867 20138 Top Mount W/Bolt $34.83
Prestolite 15-132,133, 3" x 4" x 2"
236, 311, SAS-4201, 4202, 4213, 5203. Wing Nut Battery
210399 52-307 Solenoid $42.35 Terminal
Battery Lead terminal end.

Switch Fits all sizes of battery
terminals. Wing nut style
Ideal for applications where there for automotive or marine
Battery Isolator is a battery box or other space applications.
constraints. Also ideal where
NOCO High-Performance a "hidden" location is desired. 200100 W1688-2C Wing Nut - 2-Per $7.24
Pack
Battery Isolators are 3-3/4" X 2-1/4" X 2".
designed with the latest 210866 20198 In Line Remote $29.67
solid-state technology
to meet the increasing
power demands placed
on alternators. The HP Battery Bolt

Series Battery Isolators Replaces the standard bolt Battery Terminal
eliminate multiple battery in the battery terminal with a
drain, allow simultaneous threaded stud. Overall Length:
charging of multiple battery banks, and fits virtually 1.750", Nominal Diameter: 5/8"
all makes and models. For use with negative ground, hex, Coupler Thread: 3/8-16,
12-48 VDC, nominal systems. Available in 90, 140, Battery Insert: .
and 200 amp. models. Mounting hardware and 400" long, Stud Thread: 3/8-24, Stud
instructions included. Length: .680"
210542 1GD90HP Battery Isolator High- $49.78 210857 30400 Long Battery $4.95
Preformance 90 Amp Bolt 1-Per Pack 200102 W1686C Battery Term End $3.86

PRICES SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL ORDER