Page 107 - Petron Plus with Price List

PETRON PLUS™

FORMULA 7
HEAVY-DUTY SYNTHETIC

GEAR OILS for WIND TURBINES

► PART NO.’S: 54520 Thur 54530

APPLICATIONS:
TECHNICAL DATA SHEET
Petron Plus™ Formula 7 Heavy-Duty 1. Wind Turbines.
Synthetic (PAO) Industrial Gear Oils for 2. Railroad A/C Traction Drives.
Wind Turbines are made from synthetic 3. Cement Plants.
Polyalphaolefin (PAO) base stocks fortified 4. Paper Plants.
with Petron Plus™ Formula 7 state of the 5. Steel Plants.
art additive technology to enhance oxidation 6. Textile Plants.
resistance and provide maximum protection 7. Plastic Calendars.
against wear, rust and corrosion, and 8. Ski Lifts Where Seasonal Oil Changes can be Avoided.
foaming. They provide outstanding protec- 9. Severe Centrifuge applications, Including Marine Centrifuges.
tion of gears and bearings, extended oil life
even under extreme conditions,

These fluids provide significantly better FEATURES:
thermal and oxidation stability, as well as 1. Synthetic PAO base stocks and superior additive technology.
increased protection against loss of viscosity 2. Compatible with all seal materials, plastics, and paints.
over conventional, good quality mineral oils. 3. Superior antiwear properties.
The high inherent viscosity index of these 4. Excellent protection against rust and corrosion.
oils provides higher viscosities, therefore 5. Outstanding oxidation resistance and thermal stability.
providing greater film thickness at higher 6. Low vapor pressure.
temperatures and lower viscosities for easy 7. Good demulsibility.
start-up and minimal internal friction at 8. Low pour point, high flash point, and high viscosity index.
lower temperatures. The low coefficient of 9. Longer life than petroleum oils.
friction of these oils substantially reduces 10. Meets or exceeds SIEMENS AG Flender gear units, T 7300, Table
power consumption and gearbox operating A-c.
temperatures further prolonging the usable
life of these oils. Compatible with essentially
all seal materials, plastics, and paints.
BENEFITS:
They are recommended for enclosed indus- 1. Reduced maintenance costs.
trial gear drives including steel-on-steel a. Fewer oil changes.
spur, helical, and bevel gears. Plus applica- b. Less used oil to dispose.
tions that may be subject to micropitting; c. Reduced component wear.
especially heavily loaded gearboxes with sur- d. Decreased “down time” to replace oil and parts.
face-hardened tooth metallurgies. In ex- e. Eliminates need for seasonal oil change.
treme low and/or high temperatures and f. Minimizes sludge, deposits, and varnish formation.
where corrosion may be severe. g. Reduced oil consumption and carryover.
2. Reduced hazard of fire or explosion.
3. Energy savings.

PETRON PLUS GLOBAL, INC.
TM
P.O. BOX 1906 HUTCHINSON, KS 67504 USA, 620/663-1800 Phone, 620/663-8560 Fax,
www.petronplus7.com www.petronplusglobal.com