Page 37 - Student Hand Book - Scaffolding - L&T CSTI Serampore
P. 37
Ancillary components
Castor Wheels
For use when CUPLOK is erected as a mobile tower. The shank of the wheel
fits into the base of the CUPLOK standard and is secured with a hexagonal
head bolt.
Safe Working Loads:
Steel castor wheel 730kg
Rubber tyred castor wheel 270kg
Standards available in sizes
Description Weight (kg) Diameter (mm)
Steel 7.0 200
Rubber 6.7 200
Spigot Pin
Designed to resist minor tensile forces at the joint of two standards - though not
designed to form a full tension joint. Must be used where hop-up brackets are in-
corporated in the scaffold and on loading towers.
Standards available in sizes
Weight (kg) Diameter (mm)
0.09 8
Access Ledger Brace
Provides ledger-bracing on CUPLOK access scaf-
folds. When ties cannot be placed in the correct posi-
tion or have been removed, or on scaffolds which ex-
tend above the building. Incorporates fixed wedge
half couplers which locate on the standards.
Standards available in sizes
Description Weight (kg) Diameter (mm)
Steel 7.0 200
Rubber 6.7 200
Participant Handbook : Scaffolding 37