Page 114 - April Sound Closeout Manual

®
Traffi c PROMAR LOW VOC ACRYLIC
& COPOLYMER TRAFFIC MARKING PAINT
Zone

Products TM5712 LEAD FREE YELLOW
WHITE
TM5713

Revised 9/09 10.12

PRODUCT DESCRIPTION RECOMMENDED USES
PROMAR® VOC Compliant Acrylic CopolymerTraffi c Paint is a PROMAR® VOC Compliant Acrylic has been developed for use
conventional dry (non-heat applied) acetone based paint. Acetone, over concrete, asphalt, brick and other surfaced highways and
as the main solvent, has Exempt Status under Federal law and parking lots. It can also serve as a binder for glass beads to make
does not contribute harmful VOC’s. PROMARt® VOC Compliant refl ective type markings. Do not use this product over uncured
Acrylic Traffi c Paint is 100% acrylic, which offers the following asphalt surfaces such as commonly found on tennis courts, asphalt
outstanding properties: driveways and some parking lots.

• Faster dry and hardness development.
• Performance similar to PROMAR Chlorinated Rubber Traffi c • Parking Lots • Municipalities
Paint.
• Less dirt pick-up, improved durability. • Striping Contractors • Streets and Highways
• Plant Maintance • Shopping Centers

PRODUCT CHARACTERISTICS PERFORMANCE CHARACTERISTICS
Color: White,
Lead Free Yellow (Fed Std 33538)
Test Name Test Method Results
Finish: Flat 0.95 min
Bleed Ratio TT-P-115F
Curing Mechanism: Solvent Evaporation (white & yellow)
Directional 84% min (white);
Packaging: 5-gallon pails Refl ectance ASTM E97 50% min (yellow)
10 mins max
Dry-No-Pickup ASTM D-711 (white & yellow)
Recommended Spreading Rate per coat: Dry Opacity Fed. Test Method
320 lineal feet of standard 4" stripe per gallon (calculated (contrast ratio) - 141C (5 mils bird 0.92 min.
theoretical, no loss) White applicator)
Minimum Maximum Dry Opacity Fed. Test Method
Wet mils (microns) 15.0 375 (contrast ratio) - 141C @ 15 mils 0.97 min.
Dry mils (microns) 7.5 188 Yellow
3 min. (white);
Drying Schedule: Hegman Grind ASTM D-1210 2 min. (yellow)
@ 77°F/25°C Viscosity ASTM D-562 75-90 KU
50% RH (white & yellow)
To touch: ≤ 10 minutes Pass
No traffi c pickup after: N/A Water Resistance TT-P-115-F (white & yellow)

COMPOSITION INFORMATION
Total Solids:
White 70 +/- 3% (weight)
47 +/- 3% (volume)
Yellow 70 +/- 3% (weight)
48 +/- 3% (volume)
Pigment Weight Percent:
White 55 +/- 3%
Yellow 56 +/- 3%
Vehicle Type:
White Acrylic Copolymer
Yellow Acrylic Copolymer
Density :
White 11.76 +/- 0.3 lbs/gal ; 1.43 Kg/L
Yellow 11.81 +/- 0.3 lbs/gal ; 1.41 Kg/L
V.O.C.
White <150 gms/liter
Yellow <150gms/ltr (1.25 lbs/gal)

www.sherwin-williams.com/protective continued on back